NASA’s OSIRIS-REx spacecraft collects Bennu-sian dust!

preview

On Oct. 20, 2020 at 11:10 pm British time, NASA’s Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) spacecraft  “landed” on asteroid Bennu. Why is this exciting? Read on to find out – trust me it’s worth it!

You might know that asteroids can give us clues about the formation of the Solar System, in particular about our Earth and how life developed on it. Now that technology enables us to do so, getting material directly from these objects is the best way to perform experiments on asteroid dust and rocks in order to acquire that kind of information about our Solar System.   

The first-ever landing on an asteroid was also conducted by NASA, on the 13th of February 2001 on Eros, however, this mission didn’t involve obtaining any samples. Then, the Japan Aerospace Exploration Agency JAXA’s Hayabusa missions in 2015 and 2019 enabled an initial two retrievals of asteroid material. Now it’s NASA’s turn to collect samples from an asteroid to try to understand the early Solar System better. The aim is to obtain about 60g of dust and pebbles in order to continue the studies made with the Hayabusa samples, in particular estimating the age of the Bennu compared to that of 25143 Itokawa and Ryugu, Hayabusa 1 and 2’s respective targets. If everything goes as planned, the pieces of Bennu will reach us in 2023.  

Is the world plotting against your observations? Start now your 1-week free trial and immediately access tons of top-notch quality data.
Try it free

This means that this is a long-term mission, in collaboration with JAXA: OSIRIS-REx launched from Cape Canaveral Air Force Station in Florida on the 8th of September 2016 and arrived at the asteroid in December 2018. Since then it has performed various tasks at a distance from Bennu as well as two collection rehearsals, now the exciting news is that the Touch-And-Go Sample Acquisition Mechanism (TAGSAM) successfully collected material from the asteroid. 

These images show the OSIRIS-REx Touch-and-Go Sample Acquisition Mechanism (TAGSAM) sampling head extended from the spacecraft at the end of the TAGSAM arm. The spacecraft’s SamCam camera captured the images on Nov. 14, 2018 as part of a visual checkout of the TAGSAM system, which was developed by Lockheed Martin Space to acquire a sample of asteroid material in a low-gravity environment. The imaging was a rehearsal for a series of observations that will be taken at Bennu directly after sample collection.
Credits: NASA/Goddard/University of Arizona
Start now your 1-week free trial to observe the night skies as you never did before.
Try it free

The way this works is that the probe approaches the asteroid and once the TAGSAM touches the surface, a burst of gas gets released, lifting up dust and small pebbles which are sucked up by the sampler head. After 5 seconds a back-away manoeuvre is initiated so that OSIRIS-REx doesn’t crash into the asteroid. Further analysis needs to be conducted to know how much material was exactly retrieved, however, the probe could conduct another 2 of these sample collection “landings” before starting its journey back to Earth in 2021. What will be delivered back to Earth will be shared with JAXA like Hayabusa’s samples, as well as with other research groups, and some material will be preserved for future generations’ research. 

Captured on Aug. 11, 2020 during the second rehearsal of the OSIRIS-REx mission’s sample collection event, this series of images shows the SamCam imager’s field of view as the NASA spacecraft approaches asteroid Bennu’s surface. The rehearsal brought the spacecraft through the first three manoeuvres of the sampling sequence to a point approximately 131 feet (40 meters) above the surface, after which the spacecraft performed a back-away burn.
Credits: NASA/Goddard/University of Arizona Full story
The world’s largest database of astrophotography data is waiting for you! Start now your free trial.
Try it free

The OSIRIS-REx mission can lead to another type of concrete results – by studying Bennu’s properties we could better understand its trajectory and whether it will collide with Earth in the 2170s; for now, the probability of impact is estimated at 1 in 1410 (or 0.071%), so don’t panic! 

If you want to try to observe Bennu, you can find information about its position and visibility here : https://theskylive.com/bennu-tracker